What aspects do quartz sand pump manufacturers pay attention to during the daily maintenance process

The quartz sand pump series is a new type of machine tool cooling pump that integrates a vertically installed motor and a single-stage centrifugal pump into one unit. This quartz sand pump features an attractive appearance, small size, light weight, low noise, and strong overload capacity. It can be used for circulating cooling and lubricating fluid in machine tools or other equipment.

1. Clean and lubricate all guide surfaces every day. For machine tool cooling water pumps with automatic lubrication systems, regularly inspect and clean the automatic lubrication system, check the oil level, add lubricating oil in time, and check whether the machine tool cooling water pump starts and stops oiling on schedule.

2. Check every day whether the automatic lubrication system of the headstock is working properly and replace the lubricating oil of the headstock regularly.

3. Pay attention to checking whether the cooling fan in the electrical cabinet is working properly, whether the air duct filter screen is clogged, and clean the adhering dust.

4. Pay attention to inspecting the cooling system, check the liquid level height, add oil or water in time, and replace and clean the oil or water when it is dirty.

5. Pay attention to checking the main shaft drive belt and adjust its tightness.

6. Pay attention to checking the tightness of the guide rail inserts and adjust the clearance.

7. Pay attention to checking whether there is any abnormal noise from the oil tank and oil pump of the machine tool's hydraulic system, whether the working oil level height is appropriate, whether the pressure gauge indication is normal, and whether there is any leakage in the pipelines and each joint.

8. Pay attention to checking whether the guide rails and the protective covers of the machine tool's cooling water pump are complete and effective.