Solutions to the short service life of quartz sand pump bearings

In the actual operation of quartz sand pumps, some difficult problems are often encountered. Today, let's analyze the reasons for the short service life of quartz sand pump bearings and the solutions.

Question 1: The motor shaft is asymmetrical or not parallel to the pump shaft of the quartz sand pump.

Solution: Adjust the motor shaft or the pump shaft of the quartz sand pump. If the shaft is deformed or bent, replace it directly.

Question 2: The assembly of the bearings is unreasonable.

Solution: Reinstall the bearings and shafts of the quartz sand pump, or replace the bearings.

Question 3: There is friction inside the quartz sand pump or the impeller is out of balance.

Solution: Friction should be eliminated or a new quartz sand pump impeller should be replaced.

Question 4: The bearings of the quartz sand pump are not well lubricated.

Solution: Excessive or insufficient impurities can both lead to a short service life of the quartz sand pump bearings. The bearings should be removed for cleaning before use.